Visar inlägg med etikett Howto. Visa alla inlägg
Visar inlägg med etikett Howto. Visa alla inlägg

2008-12-05

Howto make the Play/Pause key work for Amarok in Kubuntu 8.10

After installing Kubuntu 8.10 i could no longer press the "Play/Pause" key on my multimedia keyboard to pause a playing track in Amarok, instead it would restart the track.

It turned out that Kubuntu do set there own global shortcuts (Play in Amarok is assigned to the XF86AudioPlay key) for Amarok so you need to change them.

  1. In Amarok go to Settings -> Configure Global Shortcuts
  2. Press Defaults to reset all shortcuts
  3. Highlight the Amarok Action "Play/Pause" and select Custom Action and configure the Alternate shortcut to use XF86AudioPlay (Select the alternate radio button and click the box then press your "Play/Pause" key on your keyboard)
  4. Make sure the Amarok Action "Play" don't use the XF86AudioPlay shortcut and that the Amarok Action "Pause" is emty
  5. Assign your other multimedia keys like Stop, Next Track and Previous Track to there alternate shortcuts in Amarok

Now you should be able to use your multimedia keys on your keyboard like they used to. At least it worked for me.

2008-09-25

Howto kill a process in linux

If you have a program that using a lot of your computers resources or not responding it can be necessary to kill it the hard way, here are some ways to do that.

  • With the kill command.
    If you know the PID (every process in your system has a uniq number, that's the PID, shortcut for Process IDentifier ) of the process, you can send it a signal with the kill command. There are several signals you can send and depending on the process it will be terminated. Some of the most common signals to end a process are SIGHUP, SIGINT, SIGTERM and SIGKILL. SIGTERM is the signal you should try first and if that don't work use SIGKILL. To send a signal to the process with the kill command type this in a console: "kill -SIGNAL PID" where you replacing SIGNAL with a signal and PID with the processes process identifier number. To find out the PID of a process you can use one of the "pidof", "pgrep", "top", or "ps" command in a console.

  • With the pkill command.
    pkill is a command similar to kill in that it will send signals to a process to terminate it, the difference to kill is that you don't need know it's PID, instead you terminate a process based on its name. If you type "pkill firefox" in a console pkill will terminate all processes with firefox in it's name. pkill will by default send a SIGTERM signal but that can be changed. WARNING! be careful as pkill will terminate ALL your processes that have what you specified in its name.

  • With the xkill command.
    In X-Windows you can kill processes that have a window with the xkill command. Running xkill will get you a mouse cursor of a death skull and if you click with it on a window it will be terminated. In KDE pressing the Ctrl+Alt+Esc keyboard shortcut will run the xkill command.

  • With KDE.
    In a default KDE setup you can press Ctrl+Esc keyboard shortcut to open a window with all processes listed and from where you can right click on one and choose a signal to send to it.
  • With SysRq.
    With the SysRq keyboard key you can make the kernel do some really powerful stuff with you system. Type "cat /proc/sys/kernel/sysrq" in a console to see if SysRq it is enabled, if the result is "1" it's enabled or else you can activate it by running one of this command as root "echo 1 > /proc/sys/kernel/sysrq" or with the sysctl command like this "sysctl -w kernel.sysrq=1". By pressing any of the keyboard shortcuts below you will tell the kernel to do what's described in the parentheses.

    Alt+SysRq+r (The r stands for put keyboard in raw mode)
    Alt+SysRq+s (The s for sync the disk)
    Alt+SysRq+e (The e for terminate all processes)
    Alt+SysRq+i (The i for kill all processes)
    Alt+SysRq+u (The u for remount all file systems read only)
    Alt+SysRq+b (The b for reboot the system)
Beware that using some of these SysRq commands it is very dangerous as it will kill all processes in your system and you will loose all data that are not saved. Use it at your own risk and only as a last option.

Good luck killing your system.

2008-04-16

Howto make firefox work in Ubuntu AMD64 with flash and java

One of the biggest problem i had when i first installed Kubuntu 7.10 64-bit is that i couldn't run firefox with the java and flash plugins. The problem is that Adobe has no 64-bit version of flash and Sun java plugins dont work ether. There is a solution and it is to install a 32-bit firefox and the 32-bit plugins will work. So how do you do that you may ask. There is a thread on the ubuntu forum with a script that can download firefox, flash, java, install them and configure them and you don't even have to uninstall your 64-bit firefox. Go to the thread on ubuntuforums.org and click on the link "The new script will work on Dapper, Edgy, Feisty, and Gutsy" to download the script file.

If you want to know more about what the script do read through "Manual howto" section. To install Firefox and the plugins open a terminal and go to the catalog where you saved the downloaded file, unpack it and run it with the command:

tar -xvf ff32-3in1-*.tar.gz && cd ff32-3in1 && sudo ./3in1

It will ask you some question, enter you choices and when it has finished you should now have a firefox32 menu entry. Start firefox32 from the start menu and write about:plugins in the adressfield and you will be presented with a side over all plugins Firefox can use. Try to watch some videos from youtube to test that flash is working. Go to javatester.org to test that java is working.

Happy surfing

Update:
As of Kubuntu Hardy firefox and flash work "out of the box" for me after installing flashplugin-nonfree.

2008-04-07

Google Kalender med svenska helgdagar

Under det senaste året har jag använt Google Kalender som min primära almanacka.

Det som är så bra med Google Kalender är att den alltid finns tillgänglig online på nätet och att jag kan komma åt den från vilken dator som helst som har internet.

När jag registrerar en händelse i Google kalendern så kan jag ange när och hur ofta jag vill bli påmind om den händelsen. Google Kalender skickar då ut ett mail till min GMail-adress eller som en popup om man anväder GTalk. Detta passar mig perfekt eftersom jag normalt alltid glömmer att skriva upp, för mig viktiga händelser, i en vanlig fickkalender och skulle jag någon gång komma ihåg att göra det så skulle det kvitta, för jag skulle ändå inte komma ihåg att ta med mig kalendern.

Jag har lagt upp det så att jag har en separat kalender över helgdagar och andra särskilda dagar, en med födelsedagar, en för privata händelser, en för namnsdagar och slutligen en för sånt som rör min dotter.

Nackdelen med de flesta kalenderprogram är att de saknar de svenska helgdagarna. För år 2007 satt jag och skrev in alla helgdagarna själv eftersom jag inte hittade någon kalender online med helgdagar som gick att importera i Google Kalender. Jag sökte på nätet efter en fullständig kalender för 2008 och helst i iCalendar format så att jag lätt kunde importera den. Jag hittade två länkar till personer som har satt ihop diverse kalendrar över svenska helgdagar, flaggdagar och andra speciella dagar och lagt upp dem så man kan ladda ner och använda gratis.

Så hur gör man då för att få en kalender med svenska helgdagar i Google Kalender? Börja med att surfa till en av sidorna (se länkar nedan) och ladda ner den kalender du vill ha! På Camoflage.org så laddar du ner kalendern "Svenska helgdagar 2008 - för Macanvändare och iCal", packar upp filen och loggar in på din Google Kalender. På vänstra sidan klickar du på "Hantera kalendrar", sedan "Skapa ny kalender", väljer ett kalendernamn t. ex. "Helgdagar 2008" och klickar på "Skapa Kalender"-knappen.

Därefter klickar du på "Lägg till" till vänster och välj "Importera kalender". I steg 1 klickar du på "Bläddra..." och bläddrar fram till filen "helg_2008.ics" från zip-filen du packade upp. I steg 2 väljer du kalendern "Helgdagar 2008" du skapade . I steg 3 klickar du på "Importera". Om allt gick bra ska du nu ha en ny kalender med de importerade helgdagarna.

På CS Pro finns det flera olika kalendrar, ladda ner de du vill ha och följ samma procedur som ovan för att importera dem.

Stötta gärna de som gjort kalendrarna genom att skänka en slant. Instruktioner finns på deras respektive sidor.

http://www.camouflage.org/helg2008/

http://www.cs.se/how/calendar/